all necessary permits were obtained and a feasibility study was developed
all financial costs for project development have been optimized
all initial data for the design were collected
you have received the optimal project, which will take into account economic, functional-technological and architectural features and requirements
Production buildings are large and serious structures consisting of massive elements of a steel frame and having in their composition complex equipment and production lines.
In addition, if the production building is equipped, for example, with crane beams, then in addition to the static loads on the structure of the building and the foundations, it is also necessary to take into account the dynamic loads that arise during the movement of heavy machinery inside the structure.
Our designers will develop drawings of industrial buildings taking into account all the features of the subsequent operation of the building, your individual wishes, observing the design standards of industrial buildings. The architecture of the checkpoints can be varied and modern building materials make it possible to give your building an industrial hall an interesting not public appearance. The projects of industrial establishments presuppose the construction of industrial facilities of any shape and size, and the building of the shop may include an administrative building for placing personnel offices.
The technology of building industrial buildings involves the erection of shops and premises for production on the basis of steel frames, which are assembled element by element on the construction site from pre-fabricated parts in the factory. Multi-storey production buildings require massive foundations, the steel frame of the building itself is made of rolled parts of a larger cross-section and, of course, the cost of building such a production building is higher than that of single-story buildings.
One-storey production buildings are the most economical way of building for your production, and the lowest price for building a square meter of industrial and industrial buildings will be if the height of the column is about 6 meters. In this case, the consumption of materials for the construction of industrial premises will be minimal . The construction of the storage facility assumes a step of columns that is a multiple of six meters - 6 m, 12 m, 18 m, etc. Moreover, the construction of industrial buildings with a smaller column pitch (for example, 6 meters) will cost you less by reducing the costs of overlap and cover material. The roofing of the building is mainly made of sandwich panels or profiled sheet, therefore the roof mass is insignificant.
Permission for the construction of an industrial facility you will need to make out in the case when you decided to build a production building in a capital performance - on reinforced concrete foundations without the possibility of further dismantling and relocation of the storage. If you want to build a quick-assembly building on the basis of a steel collapsible frame, then such a building can be installed without foundation - on a concrete slab or metal frame, laid on a solid (for example, asphalt) site. Such a structure will be considered temporary and you will not need to obtain a permit for the construction of an industrial facility. The construction of a new workshop does not require large investments and time-consuming, if built according to our technology.
The construction of industrial buildings using the modular technology provides for the use of both prefabricated sandwich panels and sandwich panels of the elemental (sheet) assembly for covering the walls and roofing of the buildings. In the first case, a three-layer sandwich panel, based on a mineral wool insulation, or expanded polystyrene, is manufactured at the factory. in the second case - on the finished assembled steel frame of the production building layer-by-layer mounted profiled sheet, steam and waterproofing films and insulation. The roof of industrial buildings in this case is mounted in the same way. Thus, the walls of industrial buildings acquire the necessary heat-saving properties and at the same time the mass of wall and roof structures is minimal. Industrial buildings of industrial enterprises are equipped in this way. to minimize the impact of harmful factors of production on the environment and on people working in production. And the cost of a production building will largely depend on the set of necessary equipment. creating the necessary comfortable conditions - lighting, heating, ventilation. Our projects of industrial buildings provide for all the nuances and features associated with the further operation of the production building.
Construction of industrial buildings, carried out by a professional team will allow you to avoid possible difficulties and minimize the cost of building a workshop.
The construction of industrial facilities assumes the existence of a serious experience and professional approach. The projects created by our designers and the projects of our projects that we have implemented for our clients for many years are our contribution to the development of Russian business.
The area of a production building can be very different and depends only on the purpose of these or other production premises. Industrial buildings of industrial enterprises are much larger and more expensive than, for example, frame production buildings for small shops. And the cost of building a production building will also depend on its purpose and size. Nevertheless, prefabricated production buildings are the simplest, cheapest and affordable way of building a building for own production.
Concrete floors, are the so-called "pie", consisting of certain layers. All of them have their own purpose and must be packed in strict sequence.
Metal structures are lightweight and inexpensive buildings made by the frame method.
Why we choose MK
Fencing structures are sheathed with high-quality sandwich panels Both domestic and foreign manufacturers
The roof is also a "pie", consisting of certain layers. Roofing, mounted with the proper execution of work on the laying of all materials is the most important element in maintaining heat in the room.
Why we choose the membrane: